Technical Specification


Housing Material: Low copper content extruded aluminium
Lens Material: Clear tempered glass
Hardware Material: Stainless steel
End Cap Material: Machined aluminium
Gasket Material: Silicone
Surface Finish: Electrostatically applied polyester powder coat
Weight: 305 mm: 2.04 kg, 610 mm: 3.18 kg, 914 mm: 4.76 kg, 1219 mm: 6.35 kg

Electrical and control

Voltage: 100 to 277 volts
Fixture Cable: Power and data in one cable, End-to-end option (ETE): 406 mm black input cable (no jumper cable needed for minimum spacing between two fixtures)
Leader Cable Conductor: 5C: 5 x 1,5 mm2
Maximum Cable and Fixture Run Length: 76.8 m (On/Off, 277V, RO version), 50 m (On/Off, 277V, HO version)
Inrush Current (peak): 55A @230VAC
Control: On/Off control, Lumentalk, 1-10V dimming, DALI dimming, Lutron® EcoSystem® Enabled dimming, DMX/RDM enabled
Resolution (DMX/RDM): Per foot or per fixture (configured with LumenID V3 software), 8bit or 16-bit


Storage Temperature: -40 °C to 85 °C (device must reach start-up temperature value before operating)
Start-up Temperature: -25 °C to 50 °C
Operating Temperature: -40 °C to 50 °C
Ingress Protection Rating: IP66
Impact Resistance Rating: IK07 (asymmetric wallwash lens is IK06 rated)