LUMENBEAM MEDIUM LBM
Technical Specification
Physical
Housing Material: Low copper content high pressure die-cast aluminium
Yoke Material: Heavy aluminium (standard yoke included)
Lens Material: Clear tempered glass
Hardware Material: Stainless steel
Gasket Material: Silicone
Surface Finish: Electrostatically applied polyester powder coat
Weight: 3.04Â kg
EPA: Front = 0.04Â sq m, Side = 0.02Â sq m
Electrical and Control
Voltage: 100 to 277 volts
Fixture Cable: Power and data in one cable
Conductors: 6C: 3 x 1,5 mm/ 3 x 0,20 mm (DMX/RDM control), 5C: 5 x 1,5 mm (DALIT8 control)
Inrush Current (peak): 21A @230VAC (RGB), 75A @230VAC (RGBW, RGBA)
Control: DMX/RDM enabled, DALI-2 dimming Type 8, Lumentalk system is enabled with LDB accessory – see typical wiring diagrams for details
Resolution (DMX/RDM): Per fixture, 8-bit or 16-bit, 3 channels (RGB) or 4 channels (RGBW30K, RGBW40K and RGBA)
RGBW40K Colour Mixing: 16 LEDs (4x Red, 4x Green, 4x Blue, 4x White 4000K)
Environmental
Storage Temperature: -40 °C to 70 °C (device must reach start-up temperature value before operating)
Start-up Temperature: -25 °C to 50 °C
Operating Temperature: -40 °C to 50 °C
Ingress Protection Rating: IP66
Impact Resistance Rating: IK09
 Technical Specification
